Yes!  You can achieve these just by one board in your palm to replace a computer, a PCI-e board, a long FPC and a daughter board, all of them.

1.The size of SD-100(As you can see the module with light in the picture) is 80*50*12mm. It is able to replace the whole set of common SDIO test environment (Computer, PCle card, Cables, SDIO transition board). It is easy to put SD-100 inside the shielding box, completely solving the problem of traditional test environment

2.With 1 MT-1040, 1 measuring instrument and 1 computer, user can achieve that 4 boxes run testing process simultaneously and 4 boards or modules run serial testing by installing 4 SD-100 and 1 UT-804 in each box.

3.We also provide automatic test solution with robotic arm. At least increase output 6 times.

1.SDIO interface (In red frame): 9 pin 2.54 pitch, provide connection between fixture and DUT. We advise the distance of connection should be less than 20 cm.

2.Mini USB interface (In yellow frame) : USB 2.0, provide the connection with computer to control DUTs during test process.

3.Power socket(Blue frame): 2 pin 2.54 pitch, Sometimes the power of DUTs are provided by USB could be not enough. User could adapt external power supply +5v. We advise that user should measure the power consumption of DUTs to decide the way of supplying power.

4.Reset button (Orange frame): To restart the machine by press the button.

5.UART and GPIO’s connected point: With 2 set of UART and 10 GPIO, it supplies the connection of DUTs and the control of hardware.

6.System of adapter card: Linux

7.Driver of DUT: User can program it according to SDK of DUTs. We will provide Kermal in Linux system and Toolchain for programming use.